[SOLVED] Arduino CC3000 websocket client

echo.websocket.org -> Errno: 1
174.129.224.73-------------------------------------
Client connected
Sending websocket upgrade headers
Analyzing response headers
client not connected
client not available

#include <Adafruit_CC3000.h>
#include <ccspi.h>
#include <SPI.h>
#include <string.h>
#include <WebSocketClient.h>
#include "utility/debug.h"

// These are the interrupt and control pins
#define ADAFRUIT_CC3000_IRQ   3  // MUST be an interrupt pin!
// These can be any two pins
#define ADAFRUIT_CC3000_VBAT  5
#define ADAFRUIT_CC3000_CS    10
// Use hardware SPI for the remaining pins
// On an UNO, SCK = 13, MISO = 12, and MOSI = 11
Adafruit_CC3000 cc3000 = Adafruit_CC3000(ADAFRUIT_CC3000_CS, ADAFRUIT_CC3000_IRQ, ADAFRUIT_CC3000_VBAT,
SPI_CLOCK_DIVIDER); // you can change this clock speed

#define WLAN_SSID       "UNSTOPPABLE"           // cannot be longer than 32 characters!
#define WLAN_PASS       "8878333344"
// Security can be WLAN_SEC_UNSEC, WLAN_SEC_WEP, WLAN_SEC_WPA or WLAN_SEC_WPA2
#define WLAN_SECURITY   WLAN_SEC_WPA2

#define IDLE_TIMEOUT_MS  3000      // Amount of time to wait (in milliseconds) with no data 
// received before closing the connection.  If you know the server
// you're accessing is quick to respond, you can reduce this value.

// What page to grab!
#define WEBSITE      "echo.websocket.org"
//#define WEBPAGE      "/testwifi/index.html"

// Here we define a maximum framelength to 64 bytes. Default is 256.
#define MAX_FRAME_LENGTH 64

// Define how many callback functions you have. Default is 1.
#define CALLBACK_FUNCTIONS 1



Adafruit_CC3000_Client www;
WebSocketClient webSocketClient;
/**************************************************************************/
/*!
 @brief  Sets up the HW and the CC3000 module (called automatically
 on startup)
 */
/**************************************************************************/

uint32_t ip;

void setup(void)
{
  Serial.begin(115200);
  Serial.println(F("Hello, CC3000!\n")); 

  Serial.print("Free RAM: "); 
  Serial.println(getFreeRam(), DEC);

  /* Initialise the module */
  Serial.println(F("\nInitializing..."));
  if (!cc3000.begin())
  {
    Serial.println(F("Couldn't begin()! Check your wiring?"));
    while(1);
  }

  // Optional SSID scan
  // listSSIDResults();

  Serial.print(F("\nAttempting to connect to ")); 
  Serial.println(WLAN_SSID);
  if (!cc3000.connectToAP(WLAN_SSID, WLAN_PASS, WLAN_SECURITY)) {
    Serial.println(F("Failed!"));
    while(1);
  }

  Serial.println(F("Connected!"));

  /* Wait for DHCP to complete */
  Serial.println(F("Request DHCP"));
  while (!cc3000.checkDHCP())
  {
    delay(100); // ToDo: Insert a DHCP timeout!
  }  

  /* Display the IP address DNS, Gateway, etc. */
  while (! displayConnectionDetails()) {
    delay(1000);
  }

  ip = 0;
  // Try looking up the website's IP address
  Serial.print(WEBSITE); 
  Serial.print(F(" -> "));
  while (ip == 0) {
    if (! cc3000.getHostByName(WEBSITE, &ip)) {
      Serial.println(F("Couldn't resolve!"));
    }
    delay(500);
  }

  cc3000.printIPdotsRev(ip);

  // Optional: Do a ping test on the website
  /*
  Serial.print(F("\n\rPinging ")); cc3000.printIPdotsRev(ip); Serial.print("...");  
   replies = cc3000.ping(ip, 5);
   Serial.print(replies); Serial.println(F(" replies"));
   */

  /* Try connecting to the website.
   Note: HTTP/1.1 protocol is used to keep the server from closing the connection before all data is read.
   */
  www = cc3000.connectTCP(ip, 80);
  if (www.connected()) {
    /*    www.fastrprint(F("GET "));
     www.fastrprint(WEBPAGE);
     www.fastrprint(F(" HTTP/1.1\r\n"));
     www.fastrprint(F("Host: ")); www.fastrprint(WEBSITE); www.fastrprint(F("\r\n"));
     www.fastrprint(F("\r\n"));
     www.println();*/
  } 
  else {
    Serial.println(F("Connection failed"));    
    return;
  }

  Serial.println(F("-------------------------------------"));

  /* Read data until either the connection is closed, or the idle timeout is reached. */
  /*  unsigned long lastRead = millis();
   while (www.connected() && (millis() - lastRead < IDLE_TIMEOUT_MS)) {
   while (www.available()) {
   char c = www.read();
   Serial.print(c);
   lastRead = millis();
   }
   }
   www.close();
   Serial.println(F("-------------------------------------"));*/

  /* You need to make sure to clean up after yourself or the CC3000 can freak out */
  /* the next time your try to connect ... */
  /*  Serial.println(F("\n\nDisconnecting"));
   cc3000.disconnect();*/
  // Handshake with the server
  webSocketClient.path = "/";
  webSocketClient.host = WEBSITE;

  if (webSocketClient.handshake(www)) {
    Serial.println("Handshake successful");
  } 
  else {
    Serial.println("Handshake failed.");
    while(1) {
      // Hang on failure
    }  
  }  
}

void loop(void)
{
  String data; 
  if (www.connected()) {

    /*   data = webSocketClient.getData();

     if (data.length() > 0) {
     Serial.print("Received data: ");
     Serial.println(data);
     }*/

    // capture the value of analog 1, send it along
    pinMode(1, INPUT);
    data = String(analogRead(1));

    webSocketClient.sendData(data);

  } 
  else {

    Serial.println("Client disconnected.");
    while (1) {
      // Hang on disconnect.
    }
  }

  // wait to fully let the client disconnect
  delay(3000);
}

 if (www.connected()) {
        // capture the value of analog 1, send it along
        pinMode(1, INPUT);
        data = String(analogRead(1));
    
        webSocketClient.sendData(data);
        webSocketClient.getData(data); 
 
         if (data.length() > 0) {
         Serial.print("Received data: ");
         Serial.println(data);

         }
      } 
      else {
        Serial.println("Client disconnected.");
        while (1) {
          // Hang on disconnect.
        }
      }

uint8_t Adafruit_CC3000_Client::connected(void) { 
      if (_socket < 0) return false;
    
      if (! available() && closed_sockets[_socket] == true) {
        //if (CC3KPrinter != 0) CC3KPrinter->println("No more data, and closed!");
    	
        closesocket(_socket);
        closed_sockets[_socket] = false;
        _socket = -1;
        return false;
      }