Moinakhtar Salman
Newbie level 4
- Joined
- Jun 7, 2013
- Messages
- 7
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,319
hi tehir.i am trying to configure aubtm-20 via arduino rx-tx pins.
i.e i want to send "LLL" and all other AT commands to aubtum-20 via arduino-uno
board.i have connected rx of arduino to tx of aubtm..and tx of arduino to rx of aubtm.and i found that this connection is correct because when i supply power to aubtm.it prints OK on arduino's IDLE .serial monitor.
but when i esnd LLL or any other AT commands ,,their no respose..same happend when i tried this with python...
and yes i have tries all diffrents of sendig LLL or AT-commands like
<cr><lf>LLL<lf><cr>,\r\nLLL\r\n,and many more
please help me
i.e i want to send "LLL" and all other AT commands to aubtum-20 via arduino-uno
board.i have connected rx of arduino to tx of aubtm..and tx of arduino to rx of aubtm.and i found that this connection is correct because when i supply power to aubtm.it prints OK on arduino's IDLE .serial monitor.
but when i esnd LLL or any other AT commands ,,their no respose..same happend when i tried this with python...
and yes i have tries all diffrents of sendig LLL or AT-commands like
<cr><lf>LLL<lf><cr>,\r\nLLL\r\n,and many more
please help me