Aperture microstip antenna, lamped port via hfss

Status
Not open for further replies.
E

emicho

Junior Member level 3
Joined
May 9, 2011
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,422
I would to ask how to assign the excitation " lumped port" in the aperture fed patch antenna..
In the aperture the feed line would be at the bottom so should I put the port above it till the ground above ?!?
and in which direction should E fields be in this case !?
please any help
 

Helloo
No one could help with that !!
just a word guys
 



well I don't know if that would help
from top to bottom it is like this :
Patch
substrate
ground"with the aperture"
substrate
feed line

what I would like to know is where should I exactly put my lumped port to do the excitation !!!
 

Could you extend the feedline in your model and place then there a lumped or a wave port?
 

I didn't really get what you mean..
I know that lumped port should be between the feedline and the ground
but here the ground is above the feedline I don't think it would be okey to place it just in between..
any help
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…