Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Anritsu MS2601A MS2601J Spectrum Analyzer Operation Manual

Status
Not open for further replies.

pit

Full Member level 4
Full Member level 4
Joined
Jun 5, 2002
Messages
201
Helped
44
Reputation
88
Reaction score
37
Trophy points
1,308
Activity points
1,858
[No message]
 

anritsu ms2601a manual

Yes? What do you want to express with your comment?
 

    V

    Points: 2
    Helpful Answer Positive Rating
ms2601a manual


Thanks for manual,
do you now where i can find the service manual to ??
kind regards
 

anritsu ms-2601a

hamwork said:
Thanks for manual,
do you now where i can find the service manual to ??

Here!

Service manual for Anritsu MS2601A (50 Ohm) and MS2601J (75 Ohm)

CU
 

Attachments

  • ms2601a_j_sm_1680.pdf
    4.3 MB · Views: 352
  • Like
Reactions: raldo

    raldo

    Points: 2
    Helpful Answer Positive Rating
spectrum analyzer ms2601a+user manual

Thanks for manual
 
  • Like
Reactions: raldo

    raldo

    Points: 2
    Helpful Answer Positive Rating
anritsu spectrum analyzer ms2601a

Hi and thanx for the SM!

Have a MS2601A spec that dosen't work.. Have download the service manual and start to fault finding but I will trye to se if i can get some advice what i could be the "topic". If i connect the 50MHz output on the back to the input and set Fq to 50MHz and span to 200MHz i will get a normal "top" that is not locked, its flying around and if decreace the span (100KHz) the top will disappear.. One more thing is if i set Fq 0MHz, Span 0MHz and no input i will get a noice floor with sudden rise (like a mesuring a "1" TTL level with a oscilloscope) and back to the noice floor..

Both PLL LEDs Q44 and Q10 are off = locking, page 3-51.
 

Re: Anritsu MS2601A MS2601J Spectrum Analyzer Operation Manu

I bought a MS2601B last week, and I finally found the documentation here !
Thank you very much pit !

598 pages ! Reading in perspective for this weekend... :D
 

Thanks for the manuals, I have been searching for this info, much appreciated!
are there any sources for parts left?

all the best,
walter
walter2 at sphere.bc.ca
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top