Hi all,
I am using a Nuvotem Talem ASM-010 current sense transformer (**broken link removed**) together with a TI INA126PG4 instrumentation amplifier (**broken link removed**) connected to the ADC channel on my LPC2368 board (ETT CP JR ARM7). The ADC should finally be seeing a resultant analogue signal between 2.25 and 3.75V.
Due to board limitations I am looking to hook up 3 such current sensing/amplifier modules to the board via an analogue multiplexor, ideally one which only needs a +5v singled ended power supply.
Any opinions or suggestions on which multiplexors I should be looking at would be greatly appreciated.