Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

analog video to ARM MCU

Status
Not open for further replies.
R

rezaf

Advanced Member level 4
Full Member level 1
Joined
Apr 11, 2009
Messages
106
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Location
Montagram
Activity points
2,147
Hi, I want to convert analog video signal output of an analog camera to digital signals and give it to ARM MCU and do some processes on it (because ARM MCU has OS and softwares needed). I founded that I must use the "ADV7180" SDTV Video Decoder from "analog devices" (or similar IC) to do this or use OMAP35xx series ARM MCU that has internal video processor. is this methods true or do you have other suggestions ?
Thanks,
Regards.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top