an arm mcu debug isolator for high voltage application debugging

[xiaofei]

In high voltage application like 220/380VAC, or E-Vehicle batter bms debugging up to 800V;
Here is an isolator for arm cortex-m based platform mcus, like stm32, nuvoton, nxp ;
It can connect to j-link or stlink, this iso was designed when I was working for STMicro(about 2017);

View attachment 187584

Here is the original link: https://blog.csdn.net/xiaofei558008/article/details/111661765?spm=1001.2014.3001.5502
if you want it, you can buy it here: https://item.taobao.com/item.htm?_u=68kcthj4caf&id=680153274021&spm=a1z09.2.0.0.ae632e8dqThxp9

Support：
JTAG & SWD Isolated, both up to 20Mbps (under jlink-pro)
RESET Isolated
UART iso (under SWD model)