AMS Verification without using SystemVerilog

Status
Not open for further replies.

imbichie

Full Member level 6
Joined
Jul 30, 2010
Messages
381
Helped
55
Reputation
110
Reaction score
54
Trophy points
1,308
Location
Cochin/ Kerala/ India or Bangalore/ Karnataka/ Ind
sites.google.com
Activity points
3,580
Hi All,

Is there anyone know a standard Verification flow like UVM/OVM in AMS Design verification?

Here i am using the AMS designs either in Verilog-AMS or in VHDL-AMS, but for the verification i must not use the SystemVerilog (otherwise i can adopt the UVM).
So is there any formal flow for the AMS Verification?

Thanks in Advance
 

Whats the reason for not using SV?

if this is the case, you will have to probably do a lot of the verification flow yourself. There is a very good random number generation package with the OS_VVM (https://osvvm.org/) that you can base your verification modules around.
 

Whats the reason for not using SV?

Hi TrickyDicky,

Thanks for your reply, actually my aim is to Verify the AMS design which is in either Verilog-AMS or VHDL-AMS. But if i am using the UVM concepts here its difficult to understand by the AMS Designer, because they also need to use the same verification environment for Bug fixing. So from the AMS designer's side learning a new verification environment like UVM and a language like SystemVerilog is very difficult; that is why i am searching for a new verification environment for the AMS
 

You might want to look at ViaDesigner. This software combines: VHDL, Verilog, SPICE and VHDL-AMS into a unified design and simulation environment. You can download ViaDesigner at **broken link removed**.
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…