AMS .35 HV process Layout Issue

Status
Not open for further replies.
M

mvj

Advanced Member level 4
Joined
Jan 5, 2011
Messages
103
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,298
Activity points
2,130
Dear All,

I am working on the layout of my circuit and I am having a problem which I am not able to resolve, can you please help me out.

When I run DRC I get the below mentioned error though the gate terminals are connected to a pin.
[1] ERCWarning: floating gate not connected to s/d, pad, pin or resistor.


To reproduce this problem, i have taken a trasistor and connected pins to all the terminals of the device. At the gate terminal, I connected a poly to M1 contact, then VIA1, M2 Track and M2 pin (images attached for you reference). I have checked it throughly but I am not to resolve this problem. Can you please help me out.


Thanks a lot in advance!!



Best Regards,
M.
 

Attachments

  • FloatingGateError_closeView.png
    130.1 KB · Views: 272
  • FloatingGateError1.png
    117.8 KB · Views: 258

hi mvj
if LVS is clean I would not bother with an ERC issue flagged by DRC, chances are that it is miscoded
 

mvj said:
... error though the gate terminals are connected to a pin.
[1] ERCWarning: floating gate not connected to s/d, pad, pin or resistor.
...
At the gate terminal, I connected a poly to M1 contact, then VIA1, M2 Track and M2 pin ...
Click to expand...

Did you also use the MET2 pin layer?
 

erikl said:
Did you also use the MET2 pin layer?
Click to expand...

I don't know about Assura but for Calibre the port stamping layer is PIN:metal2 (abbreviated PIN:M2 in LSW) not MET2in; for example the latter is not exported to gds...
 
Hi,
Your prb is an ERC and not a DRC probkem.
 

I got the problem resolved.

I placed a pin ( ctrl + p). This is ok for DIVA and not for Assura. In Assura a layer of type PIN:M2 should be placed as mentioned by dgnani.

Thank you for your help!!
 
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…