[SOLVED] Altium Query Builder Track With by Pad

Status
Not open for further replies.
H

HobbyElec

Newbie level 3
Joined
May 30, 2008
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,297
Hi All,

I try to change track with for some net but except some pads is possible ?

Thanks to your help.
Olivier
 

I have tested whit this solution:
I create PadClass Named Not 1.7mm and select the pad for this classes.

I create Rule Routing Width: Min,Pref,Max 0,25mm and Select All Priority 2
I create Rule Routing Width: Min 0,25 and Pref,Max 1,7mm And write this Query= InNet('GND') and not InPadClass('Not 1.7mm')

But not Works.

Any Idea ?

Thanks
Olivier
 

I don't think this is possible because a pad is considered a part of the electrical net it is connected to, and net clearance rules apply to it.
 

Thanks to reply.

I have routed the maximum with autorouter and modified manualy.

Bye
Olivier
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…