Minipixel
Newbie level 1
Hello,
I have strange problem in Altium PCB 2D and 3D display. Silkscreen (designators and other strings) are acting crazy:
I'll give an example of the problem.
Let's look at this string with date (2014-03-20). While it stays outside of the board everything is ok:
When I try to move it back on the board, it starts to disappear:
When I is all on the board, it disappears at all:
If I try to move it around, it destroys the other strings (there should also be "watch_v1" and "main board" strings written above the date):
All other designators are acting in a similiar way. In 3D I get the same result.
One more thing: when zoomed out very much, these strings appear again.
I have tried going through the options, but with no luck.
Maybe someone could help me?
I have strange problem in Altium PCB 2D and 3D display. Silkscreen (designators and other strings) are acting crazy:
I'll give an example of the problem.
Let's look at this string with date (2014-03-20). While it stays outside of the board everything is ok:
When I try to move it back on the board, it starts to disappear:
When I is all on the board, it disappears at all:
If I try to move it around, it destroys the other strings (there should also be "watch_v1" and "main board" strings written above the date):
All other designators are acting in a similiar way. In 3D I get the same result.
One more thing: when zoomed out very much, these strings appear again.
I have tried going through the options, but with no luck.
Maybe someone could help me?