cciarleg
Junior Member level 3
Hi,
I have a set of boards I wanted to try and do a flex between. The boards are 3.7" and the flex is 3.2" wide, 4 layers between them (rigid boards are arbitrarily set at 14 layers right now). Flex section is checked off as flex in layer stackup. I put a bending line in-but it won't change the affected shaded area or bend in 3d when I use the fold slider at all. What is going on with my bending line? (I've tried moving it around etc with no luck)
Thanks.
I have a set of boards I wanted to try and do a flex between. The boards are 3.7" and the flex is 3.2" wide, 4 layers between them (rigid boards are arbitrarily set at 14 layers right now). Flex section is checked off as flex in layer stackup. I put a bending line in-but it won't change the affected shaded area or bend in 3d when I use the fold slider at all. What is going on with my bending line? (I've tried moving it around etc with no luck)
Thanks.