Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

allegro cadence 17.2 query

Status
Not open for further replies.
A

Adwaittronics

Junior Member level 3
Junior Member level 3
Joined
Apr 29, 2014
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
244
Hi I am using Allegro cadence 17.2 , I have created cutout slots on the PCB in "Class: Board Geometry and Subclass : outline" but when i export IDX
these cutout slots are not visible whereas mounting holes on the pcb are visible ,can anyone tell what could be the reason for this?
Do i need to change the class and subclass?
i am using creo parametric 3.0 to view the IDX.
 

try adding in board geometry --> design outline or in board geometry -->cutout
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top