Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

All ECU public CAN channels are on different CAN networks?

Status
Not open for further replies.
J

jani12

Advanced Member level 4
Full Member level 1
Joined
Oct 30, 2014
Messages
108
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,298
Activity points
2,536
Consider an Electronic Control Unit (ECU) mounted in a vehicle. Let's say this ECU has Three CAN channels as follows:

CAN 1
CAN 2
CAN 3

Do these Three CAN channels have to be on different CAN networks? Another words, for example, CAN 1 and CAN 2 are never on the same CAN network?

It wouldn't make sense to connect CAN 1 and CAN 2 on the same network because why would ECU want to receive what it transmits? And why ECU want to receive identical information on CAN 1 and CAN 2?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top