Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Advice for running EDA tools on Suse 9.0

Status
Not open for further replies.
G

g3nster

Junior Member level 1
Junior Member level 1
Joined
Apr 13, 2003
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
157
Suse 9.0

Any advice in runing EDA tools using Suse 9.0?

Thanks in Advan!
 

Re: Suse 9.0

Hi

1. I have tested IC5033 running in suse 9.0 professional.
It is running well.
But If someone asks me for advise I prefer
the following system:

Redhat linux 7.2 (kernel 2.4.+)
A moderated VGA (Somehow older)
512+M RAM
60G+ HDD (With cache or in plus marks)
X-display in 24-bits -truecolor depth

Regards
tnx
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top