Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Advice for a Power Supply Layout

Status
Not open for further replies.
F

factory37

Newbie level 5
Newbie level 5
Joined
Sep 9, 2012
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,378
Hello everybody!!

I designed a power supply for running a magnetron. Thus in the output stage I must have 4.3 k and the output power will be around 1.2 kW. I would like to hear your comments/advices/recommendations for my layout. Thank you for your help

Schematic (pdf):
View attachment 1kW-220V.pdf

Images:
TOP.JPGBOTTOM.JPGPLACEMENT.JPGComponents.JPG

Clarifications:
- It is a LLC power supply.
- The inductor L5 is that one without name in the schematic, it is a big inductor.

Thank you again!!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top