Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Advice for a nube needed, building a smart camera prototype.

Status
Not open for further replies.
H

has981

Newbie level 3
Newbie level 3
Joined
Mar 1, 2010
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Jordan
Activity points
1,310
Hi all,

I'm fresh to the DSP and embedded system design so please excuse my ignorance.

I need to build a prototype for a machine-vision system. I've been researching the topic for quite a while now and have come up with the following set-up.

BF-561 EZ-KIT Lite to do the image processing.
ADI-A/V EZ-Extender.
Micron MT9V131 CMOS Headboard from here: **broken link removed**

My questions really are: would this combination work? Do I have better / other choices? Any help or advise would really be appreciated.

Thanks in advance,
Hasan
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top