Manolis_ece
Newbie level 1
Hello to everyone,
I have a problem with ADS, i try to rectify a signal which has a sweep in frequency.
To be more specific, i have the input (AC signal from 325MHz to 475MHz), then I use an s2p file, and then i want to make it DC. I have tried many ways but nothing works and I always get 0Volt as output.
Thanks in advance.
I have a problem with ADS, i try to rectify a signal which has a sweep in frequency.
To be more specific, i have the input (AC signal from 325MHz to 475MHz), then I use an s2p file, and then i want to make it DC. I have tried many ways but nothing works and I always get 0Volt as output.
Thanks in advance.