Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Advanced design system, AC to DC (Rectifier)

Status
Not open for further replies.
M

Manolis_ece

Newbie level 1
Newbie level 1
Joined
Apr 22, 2018
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
8
Hello to everyone,
I have a problem with ADS, i try to rectify a signal which has a sweep in frequency.
To be more specific, i have the input (AC signal from 325MHz to 475MHz), then I use an s2p file, and then i want to make it DC. I have tried many ways but nothing works and I always get 0Volt as output.

Thanks in advance. :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top