ADS - optimization, help needed

Status
Not open for further replies.

kato01

Full Member level 2
Joined
Dec 2, 2002
Messages
123
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,298
Activity points
831
ADS - optimization

Anybody using ADL schematic ?

I am just starting to use it and either I am doing something wrong or I interpret the results wrongly.
My variables are defined in 'mils', however the optimization seems to take it in meters (!). I correlated the numbers and they match.
Am I missing here somethig?

Tx

Kato01
 

You must miss something.
Everyone with experience of ADS would suffer this .

Be patient and check all your setting.
 

to get away from this problem, I always use metric and engineering number representation ( 5e-12 for 5pF).
 

a mil is 1/1000 of an inch (a milli-inch?). it is not a millimeter (metric) but english measure. quite commonly used measurement in the US for PCB design
 

T continue the above here is an example:
10 mil = 0.254 mm
 

I think there are 2 places for defining the unit for a project. Can't name them now, check the manual.
 

Why doesn't the original user upload his original ADS file and we senior users do the diagonosis?
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…