Deepak Rathore
Member level 2
- Joined
- Apr 25, 2012
- Messages
- 46
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 1,659
Good evening friends,
As i am working on ADE7763 and i successfully got the Value of Vrms and Irms ,
now i m going to read power from ADE7763,but i did not understand the way of reading power and calculation of constant(Wh/LSB).
I made following config in the ade7763 which is as following:
LineCYC: 0x00C8
Mode : 0x0080
Mask reg: 0x0014
then i m reading the LAENERGY register(0x04).but my register readings are decreasing form maximum when i increase the load.
and i really did not understand the way that how can i convert my energy readings into the power readings and also how could i calculate the wh/LSB constant for power. i did not understand why ADE7763 behaves in such a way.
Deepak
As i am working on ADE7763 and i successfully got the Value of Vrms and Irms ,
now i m going to read power from ADE7763,but i did not understand the way of reading power and calculation of constant(Wh/LSB).
I made following config in the ade7763 which is as following:
LineCYC: 0x00C8
Mode : 0x0080
Mask reg: 0x0014
then i m reading the LAENERGY register(0x04).but my register readings are decreasing form maximum when i increase the load.
and i really did not understand the way that how can i convert my energy readings into the power readings and also how could i calculate the wh/LSB constant for power. i did not understand why ADE7763 behaves in such a way.
Deepak