adding customized FIFO peripheral (in verilog ) to Microblaze.

luqman_abbas2 · Mar 20, 2013

Hi all!

I am trying to interface a FIFO customized peripheral to MicroBlaze in Verilog because I do not know VHDL. I have got through the stuff available and tried some of them too on my Spartan3e 500 kit. but i am unable to acquire good results.

any guidance for me??

Thanks in advance!

Luqman

luqman_abbas2 · May 2, 2013

hello!

I am trying to add a FIFO custom peripheral with some additional code in micro Blaze. I a

"

ERROR:NgdBuild:604 - logical block 'fifo_0/fifo_0/USER_LOGIC_I/t1/my_peri/me1'
with type 'mem' could not be resolved. A pin name misspelling can cause this,
a missing edif or ngc file, case mismatch between the block name and the edif
or ngc file name, or the misspelling of a type name. Symbol 'mem' is not
supported in target 'spartan3e'.

"

i have tried the solution in
http://forums.xilinx.com/t5/Embedded-Development-Tools/ERROR-NgdBuild-604-in-XPS-12-4/td-p/203867

but i m not getting results..

any one can help me out?

Regards.

Luqman

adding customized FIFO peripheral (in verilog ) to Microblaze.

luqman_abbas2

Junior Member level 1

luqman_abbas2

Junior Member level 1

Similar threads

adding customized FIFO peripheral (in verilog ) to Microblaze.

luqman_abbas2

Junior Member level 1

luqman_abbas2

Junior Member level 1

Similar threads

Privacy & Transparency

Privacy & Transparency