[SOLVED] Adaptive passes did not converge based on specific criteria

Status
Not open for further replies.
R

Radike

Member level 3
Joined
Aug 24, 2008
Messages
58
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,286
Activity points
1,722
hfss adaptive passes did not converge

Hi,
I am using HFSS V11.0 and I am new to HFSS. When I simulate a structure sometimes I am getting the warning, "Adaptive passes did not converge based on specific criteria". Can somebody explain why this is so, does it change my simulation results as well and how do I choose the adaptive passes correctly when simulating a structure?

Thanks a lot!!!
 
adaptive pases didnot converge

What that means is that the convergence was not reached by your adaptive passes (that is delta S is not under 0.02, which is typical value). You need to let the HFSS solve more passes (increase the max adaptive passes value in the analysis-setup window).
 
simulation not converge

Hi,
Thanks for the reply. Can you explain how does it affect my simulation results? Does it give me wrong simulation results?

Thanks!!
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…