Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Active Band-pass Filter using Op-amp help

Status
Not open for further replies.
G

gunstriker

Newbie level 2
Newbie level 2
Joined
Feb 1, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,297
low pass filter using op amp

am required to modify my passive band-pass filter (low-pass + high-pass) with active device to have a passband gain of 0 dB with no phase inversion. Can anyone show me how to do this? Thanks

the attenuation at 0.1fc1 and 10fc2 should be at least 10db

fc1= 1.03khz
fc2=60.3kz

LPF capacitor value =0.022uF AND resistor value=120ohms
HPF capactior value =0.047uF AND resistor value= 3.3Kohms

Thanks in advance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top