kshitij_lakhani
Newbie level 5
- Joined
- Feb 15, 2015
- Messages
- 10
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 69
https://www.edaboard.com/showthread.php?t=244902
I have used the code provided in the thread discussion given above.
However , the accelerometer is detecting the accident , but when it comes to sending location via message , i am not receiving a message from the module.
I have separately checked the sim900A module on hyperterminal and it works perfectly fine. Also , when i connected the gps module to the pc , i could see the data received by gps on hyperterminal .
However , the initial poster of the link above was able to get the required results. Please help me . Its urgent . Thank you !!!!!
I have used the code provided in the thread discussion given above.
However , the accelerometer is detecting the accident , but when it comes to sending location via message , i am not receiving a message from the module.
I have separately checked the sim900A module on hyperterminal and it works perfectly fine. Also , when i connected the gps module to the pc , i could see the data received by gps on hyperterminal .
However , the initial poster of the link above was able to get the required results. Please help me . Its urgent . Thank you !!!!!