Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Accessing w and l of mos devices from inside hspice model

Status
Not open for further replies.
C

carl_chao

Member level 3
Member level 3
Joined
Aug 31, 2005
Messages
55
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,288
Activity points
1,726
Hi,

I'm trying to do some Hspice Monte Carlo sims by changing the VTO's etc. inside the Hspice .model card in order to avoid the hassel of chaging the VT's for every devices in a circuit. To do this, I need to access the device w and l from inside the device .model card. Does anyone know how to do this? Once I saw someone used e(*, w) like function in Eldo .model, does anyone know if Hspice has the same kind of function?

Thanks in advance!

CC
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top