ac motor speed control

Status
Not open for further replies.
G

garg29

Advanced Member level 1
Joined
Nov 17, 2004
Messages
443
Helped
25
Reputation
50
Reaction score
10
Trophy points
1,298
Activity points
3,593
hi friends,
me want to design a three phase ac motor speed controller.........the motor ratings are: three phase, ac, 220v,50hz,960rpm,2hp ,induction motor.
please help me out guys ...how to proceed from scrap....should i use traic or igbt'sor what else.[/img]
 

You can controll an AC motor with a v/f or vector regulation.
v/f is more easily, and it usually cold be realiyed on a microcontroller.
Vector controll is a modern approach , which gives much better results, but it needs more programming effort, and usually a specialized DSP.
 

Here is my advice: DON'T DO IT !!!

It is quite complicated and complex issue and if you can buy a off-the-shelf controller for $300+ it will be 10+++ times cheaper than a controller (little chanses for final success...) you are trying to design and construct..
Go to the beach, mate, don't wast your time !!!

I know, sounds terrible, but it is true, believe me...
 
Hello

You can use the diac/thyristor, cause I think you will have problems when using triac.

Try to see the datasheets of TCA785, I remember I have seen some thing about 3-phase motor controlling, here you may use triac, don't know why

Regads
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…