Ivan-Holm
Member level 5
- Joined
- Jun 3, 2010
- Messages
- 84
- Helped
- 3
- Reputation
- 6
- Reaction score
- 2
- Trophy points
- 1,288
- Location
- Denmark
- Activity points
- 1,894
Hi
I have made a little schematic with decoupling LED in Orcad,
C1 & C2 decouple the AC Ground, so you don't have Net Ground but still 230Volt AC.
my questions is I got some net-list error because of the DC decoupling capacitors. but how do I Fix this make a spice simulation without changing the schematic.
the schematic can see below
I have made a little schematic with decoupling LED in Orcad,
C1 & C2 decouple the AC Ground, so you don't have Net Ground but still 230Volt AC.
my questions is I got some net-list error because of the DC decoupling capacitors. but how do I Fix this make a spice simulation without changing the schematic.
the schematic can see below