Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

About enhance gain of antennas

Status
Not open for further replies.

caocao

Advanced Member level 4
Full Member level 1
Joined
Nov 23, 2003
Messages
110
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,298
Activity points
917
Hi everyone,
I meet a question recently,we need to design circularly polarized antenna that gain is about 14dBi in L-band (1.6GHz),but if use array such as microstrip,the area is too wide and a single helix and horn antenna reach 14dBi is difficult. 8O .I want to know which circularly polarized element could achieve it ?
Thanks!
CaoCao
 

You are up against the laws of physics. Your only choice for reducing the two axis dimensions is to increase the dimensions in the third dimension.

This will require a helix type antenna or two udi-yagi types at right angles with a phasing splitter driving them.
 

caocao said:
Hi everyone,
I meet a question recently,we need to design circularly polarized antenna that gain is about 14dBi in L-band (1.6GHz),but if use array such as microstrip,the area is too wide and a single helix and horn antenna reach 14dBi is difficult. 8O .I want to know which circularly polarized element could achieve it ?
Thanks!
CaoCao
whats the requiered bandwidth? and space limitation? one way to enhance the directivity of p@tches is to use superstrates (substrates above the patch) with high permitttivity, but if you need a high bandwidth, it could not been used. (bytheway, 14DBi is really high, maybe its better to use active antenna with this requerement). moreover, you may use a reduced size p@tch wich nearing the radiating adge of the p@tch, and thus highering its directivity, you may use notched p@tches, or some fractal p@tches, but remember, in order to have the most possible gain, you have to use the most possible volume for the anenna.

marti
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top