Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

about dbm/200khz problem..

Status
Not open for further replies.
S

super

Full Member level 2
Full Member level 2
Joined
Aug 18, 2002
Messages
125
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
904
Dear all :
The doc spec write as below ,
Frequency = 2Mhz to 50Mhz
Emission Level= -30dbm/200khz

1. what's it mean ?
2. How should I do when I measure spurious use Spectrum Analyzer ?
(ex: set RBW=200khz and measured spurious below -30dbm is pass ?
or others )


Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top