about checking the speed of the direct form fir 1 and it's transpose

Status
Not open for further replies.
K

kannan2590

Member level 4
Joined
Sep 1, 2012
Messages
77
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
india
Visit site
Activity points
2,321
how can i check the speed of operation of direct form fir filter1 and it's transpose while simulating in modelsim. I am using xilinx . What does the synthesis report show.Is there any way to compare the speed of operation of direct form fir 1 and it's transpose. can anybody give the idea.
 

Hello kannan2590

Perhaps max clock frequency in Xilinx synthesis report could be compared for both implementations and greater max clock frequency indicates faster speed of system.

Hope this will be helpful.
 

The fir filter output is delayed by N/2 its input sample times, where N is filter order. This gives the speed. No overclocking can help.
 

Eminent.Engineer said:
Hello kannan2590

Perhaps max clock frequency in Xilinx synthesis report could be compared for both implementations and greater max clock frequency indicates faster speed of system.

Hope this will be helpful.
Click to expand...

As you say i got the meaning but in VLSI books like keshav parhi it is told that for the direct form i of fir filter the execution time is tm+(2*ta)

tm->execution time of multiplier
ta-> execution time of adder.

here i am considering an fir filter with 3 multipliers and 2 adders.

for transposed implementation it is tm+ta.

Now in the synthesis report how it is possible to measure the execution time of the multiplier and adder?Can you tell me?
 

Synthesis process will compute the timing of all components itself and show the maximum clock frequency for your design.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…