A strange phenomenon during LDO stability analysis

Status
Not open for further replies.
M

mjun0mjun

Newbie level 2
Joined
Nov 13, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,293
Hey guys.I am doing a LDO stability analysis with corners. In most cases, the loop gain bode curves seem fine except @30mA load current, high temperature & strong device. The strange phenomenon is that "the loop gain phase margin curve" starts from 0 degree instead of 180 degree. The strange curve is attached in the "pic_stb". The red curve shows the strange phenomenon, while the green one is normal. And 30mA is in the middle range of the LDO working current. Very pleased to hear your advice. Many thanks!
 
Last edited:

Have you tried out a transient simulation? But surprised that you a couple of low frequency zeros, interesting arch
 

Yeah, I've tried transient simulation, which is fine without oscillation.

yuvan said:
Have you tried out a transient simulation? But surprised that you a couple of low frequency zeros, interesting arch
Click to expand...
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…