xihuwang
Member level 2
Hi, every one :
Could any one tell me how to set the cap value of Cp2 and Cn ?
And my ohter question is :why the Vctrl is refer to VCC , but not to gnd ?
For my pmos vt is greater than nmos's , this maybe result in small dynamic
range for vctrl .
The ckt is in the below file
Could any one tell me how to set the cap value of Cp2 and Cn ?
And my ohter question is :why the Vctrl is refer to VCC , but not to gnd ?
For my pmos vt is greater than nmos's , this maybe result in small dynamic
range for vctrl .
The ckt is in the below file