A QUESTION ABOUT THE ad8302

Status
Not open for further replies.
S

springf2000

Full Member level 6
Joined
Jun 13, 2004
Messages
381
Helped
20
Reputation
40
Reaction score
2
Trophy points
1,298
Visit site
Activity points
2,500
ad8302

dear all:

i want to use the AD8302 to check the difference between the input and output of the WCDMA power amplifier,but the datasheet tell me the envelope bandwidth is 30MHZ,can i use it to do this job!
because the WCDMA downlink bandwidth is 60MHZ, i want use only one AD8302
to do this job, i donot know how the envelope bandwith of the WCDMA signal!
 

I think you can use it, as in WCDMA the BW is smaller (I don't remember if 2 or 5 MHz). The 60 MHz is the total BW not the channel BW.
I hope I'm right...
Mazz
 

In WCDMA the BW usually is 3.84MHz (could be larger for different chip rates).
I have used AD8302 for this kind of application and was working fine, using even higher BW.
AD8302 is a very nice chip, ADI pushing to the limit a very simple idea.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…