dudleyzty
Junior Member level 2
- Joined
- Apr 21, 2002
- Messages
- 24
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 109
When I create netlist from schematic project,I find some nets are treated
as different part! eg. I have only one VCC net,but
there're two VCC group in the netlist! By the way,I'm designing a four
layer PCB, almost all power nets have this problem. Some pads or vias
cannot be connected to associate power layer because this problem.
Who can help me? Thanks a lot!!
as different part! eg. I have only one VCC net,but
there're two VCC group in the netlist! By the way,I'm designing a four
layer PCB, almost all power nets have this problem. Some pads or vias
cannot be connected to associate power layer because this problem.
Who can help me? Thanks a lot!!