zoe88
Newbie level 3
- Joined
- Mar 11, 2013
- Messages
- 3
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,327
a problem with the dynamic parameters of a flip around SHA
Hi guys!I have designed a flip around SHA for a 10 bit 80 MHz pipelined ADC, yet the fft analysis results are very bad, the peaks of the harmonics are very high and there's too much noise. I wonder if it's because I didn't use bootstrapped switches or it' the problem with my amp or anything else. I have attached some net lists and fft analysis plot(hspice 2010) and a smic0.13 um lib. Please give me any comments that may help. Thanks a lot!
View attachment differential-SH_fft.sp.txt
Hi guys!I have designed a flip around SHA for a 10 bit 80 MHz pipelined ADC, yet the fft analysis results are very bad, the peaks of the harmonics are very high and there's too much noise. I wonder if it's because I didn't use bootstrapped switches or it' the problem with my amp or anything else. I have attached some net lists and fft analysis plot(hspice 2010) and a smic0.13 um lib. Please give me any comments that may help. Thanks a lot!
View attachment differential-SH_fft.sp.txt
Last edited: