a problem about the netlist genarated by spectre

[mendenz]

the voltage source hasn't the define of voltage type in my netlist.
lt's a correct netlist:
V1(vdd gnd!) vsource dc=3 type=dc
but in my netlist,the voltage source is definded as follow:
V1(vdd gnd!) vsource dc=3
so,if the voltage source is pwl or pulse,the simultion can't be go on.


how to deal with the problem???

 

[karim.elmahdy]

then put two arguments like you do dc=3 ac=0 and this will do it dont worry.

 

[ychen]

If you add a parameter of type and wave message to the source then run it, the results are shown as you expecte. However, I do not know what causes the error translation from the schematic.
Could any person know how to fix it?