a DRC issues（for Eagle software）

Status
Not open for further replies.

namaz

Newbie level 4
Joined
Nov 21, 2016
Messages
7
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
61
I designed a simple one layer PCB by Eagle CAD and want to manufacture it, I send it to PCB fab but they told me my design can't passed their DRC. they told me the minimum spacing between the trace and board edge they can manufacture is 12mils, I setup the value but there are some "overlap" errors on the lower right corner. Is there any way can fix the warning?
 

Hi,

Show us the board detail and the complete DRC error, which layers are overlapping.

Klaus
 

Did you make the one layer thing correctly?? make sure the "keep in" line for bottom side is still there specially if you have THT components.

Ciao!
 
Reactions: xartadvisor

    X

    xartadvisor

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
HasHx said:
Did you make the one layer thing correctly?? make sure the "keep in" line for bottom side is still there specially if you have THT components.

Ciao!
Click to expand...

i made a wrong one layer file, there is no components in the bottom layer but also need make some line for keep out layer...
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…