A circuit that gives monostable pulse if the input is high

Status
Not open for further replies.

RollingEEE

Full Member level 3
Joined
Mar 25, 2006
Messages
165
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,298
Location
Bangladesh
Visit site
Activity points
2,406
Hi,

I want to design a circuit that gives an astable pulse if the input is high for 5 seconds. And then another pulse if the input is 5 for another 5 seconds and so on. Please help me. If the input is not high for 5 seconds, the output remains low
 

Firstly, the input signal is converted to digital signal by a comparator. Then you can use a digtial calculator to counter the digital signal. If the digital is high for 5seconds, reset the calculator and output a high signal
 

Re: A circuit that gives monostable pulse if the input is hi

design the circuits for the outputs that you want i.e. astable, monostable etc etc.... then multiplex these outputs using a analog mux for every 5 seconds using a counter... for turning on the circuit after 5 second use input from voltage across a capacitor which is being charged using a current source...
 

Re: A circuit that gives monostable pulse if the input is hi

Well, the problem is, that I don't want a circuit that can give a pulse after 5 seconds of the input pulse. I want a circuit if the input is high for 5 seconds. If the input is pulsing, and the frequency of input is less than 5 seconds, no output pulse will be generated
 

Re: A circuit that gives monostable pulse if the input is hi

pfd001 said:
Firstly, the input signal is converted to digital signal by a comparator. Then you can use a digtial calculator to counter the digital signal. If the digital is high for 5seconds, reset the calculator and output a high signal
Click to expand...

please explain more
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…