Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

9khz-12.75GHz combiner?how to realize?

Status
Not open for further replies.
A

amicloud

Full Member level 2
Full Member level 2
Joined
Oct 11, 2004
Messages
138
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Activity points
1,100
need the full band to be passband.use as few filter as it can?
 

Does this have to be minimum loss and high isolation? Otherwise a star of 17 ohm resistors will work. Each one connected to an external port.

[edited part was typo in resistor value]
 

thanks alot.
but for a 3-way resistive diver,how to realize?
 

Connect 3 resistors (16,7 Ω) as a star and the divider is ready.
S21 Attenuation 6 dB.

Added after 10 seconds:

Connect 3 resistors (16,7 Ω) as a star and the divider is ready.
S21 Attenuation 6 dB.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top