gagandiep
Newbie level 2
can anyone tell if there is a problem with this design........View attachment PCB Wizard - Professional Edition - main.pdf
the pcb is meant to do a simple job of asking what time delay is required which is set by means of the buttons provided at the right side and after the time is over it should switch on the relay.
the problem is it dosent show anything on the lcd first hand......
the pcb is meant to do a simple job of asking what time delay is required which is set by means of the buttons provided at the right side and after the time is over it should switch on the relay.
the problem is it dosent show anything on the lcd first hand......
