Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Re: RE: NEED SERVICE MANUAL FOR SENCORE LC53 CAP & IND Z
Called Sencore and they sent me a pdf of the schematic. I have 2 of them. Great meter. Only thing that can really check capacitor leakage here in the shop. Like to build one with a pic computer some day, if I could figure out how it works.
Re: NEED SERVICE MANUAL FOR SENCORE LC53 CAP & IND Z
thanks for posting the schematics - i'm trying to repair mine. It will check leakage and inductance work - but wont read cap values.
When i push the value button - i get -7.0 volts at the postive lead - i traced the voltage through the switch - i disconnected pin 12 of the tl084
on the ic i get the -7.0 v but on the trace i get +5.0v back to the probe positive lead i still get -7.0v
has anyone ran across this?
I have the same Z-meter. I would like to use it to check and trouble-shoot on the capacitors in the tube amps. I don't have any operation manual and service manual either. I would appreciate if you could make them a pdf file so send to me.
My email address: jgkjgk@gmail.com
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
