Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Simulation of a microstrip transmission line

Status
Not open for further replies.

swastik

Newbie level 5
Newbie level 5
Joined
May 11, 2006
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,335
microstrip transmission line length calculator

Can Any one help me out by providing the basic sketch of the Simulation of a microstrip transmission line preferably in MATLAB
 

what is distributed microstrip transmission line

Hi !

I don't think its possible to simulate a microstrip T.L. on matlab.

Do you have some experience of simulating a MW model in matlab?

Itzik
 

Hi ,
why not just use impendance and phase to describe microstrip line in MATLAB


Cheng
 

Hi Cheng !

It's impossible to represent a microstrip T.L. with just impedance and phase becasue this T.L. is distributed and has phase accumulation as a function of a distant (length).
Its catagorized as distributed T.L. and not as lumped (discrete).

I can know for sure that you can simulate and calculate any discrete/lumped circuit with matlab (c) but never something distributed. (true for now)

Regards,
Itzik
 

itzikhaim said:
Hi Cheng !

It's impossible to represent a microstrip T.L. with just impedance and phase becasue this T.L. is distributed and has phase accumulation as a function of a distant (length).
Its catagorized as distributed T.L. and not as lumped (discrete).

I can know for sure that you can simulate and calculate any discrete/lumped circuit with matlab (c) but never something distributed. (true for now)

Regards,
Itzik


hmm. if Spice and other RF-simulators can handle TL fair well I not see impossibly to using matlab with simular algorithm/formula..

and if look on google I see many link if using ' matlab transmissions line' as search word.
 

Hello,

It's difficult to do what you called 'simulation of microstrip line using MATLAB', but if you just want to have a width and length value, for certain impedance and electrical length at certain frequency, you could get it from transmission line calculator from Microwave Office or ADS.

I've seen many links as well in www for microstrip line calculator.
 

Hi xxargs !!

I may say you right about the possibility of simulation T.L. in matlab.

But I may refer to it, still, as 'impossible mission' after knowing very powerful
tools design like CST, HFSS and even FEKO (a little bit).

For me its very frustrating to program (like C++ lang.) a given matrix which represent a T.L. phase characteristic.

You may not do this - let the ready MicroWave software to handle it for you.

Good Luck
 

Take a look at the book "stripline and slotline" by Gupta.

Linker
 
  • Like
Reactions: safura

    safura

    Points: 2
    Helpful Answer Positive Rating
There is another simple T.L. Calculator @

h**p://www.hp.woodshot.com/appcad/appcad.htm
 

This one is from rogers
h**p://www.rogerscorporation.com/mwu/mwi_java/Mwij_vp.html
 

u anjust use impendance and phase to describe microstrip line in MATLAB
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top