In cadence, how to resimulate the transient simulation from the point of completion?

[mssong]

I ran cadence's transient simulation for 1s and got the waveform.

Is it possible to run the simulation for only 1 second, starting from the part of the simulation (1s) and ending at (2s), without simulating the previous part (1s)?

 

[dick_freebird]

In the transient analysis setup you can save final operating point,
and somewhere in there you can also set an initial condition file
and a start timepoint. You may need to suppress DC initial
condition to force using the tran final OP instead (been a while
since I have done chained tran analyses). It's all in there though.