Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Pushpull transformer leakage inductance?

Status
Not open for further replies.
C

cupoftea

Advanced Member level 6
Advanced Member level 6
Joined
Jun 13, 2021
Messages
3,059
Helped
62
Reputation
124
Reaction score
139
Trophy points
63
Activity points
15,963
Hi,
We have a pushpull transformer, NP/NS = 4/8
ie pri is 2 coils each of 2 turns
sec is 2 coils each of 4 turns.

Leakage inductance measured at one primary "half" was 100nH....this was with all three secondary wires shorted together.

As such, do you agree, the leakage is 50nH in primary "half" 1; 50nH in primary "half" 2; 200nH in secondary "half" 1; 200nH in secondary "half" 2.
 

Sort by date Sort by votes
There was only one leakage inductance figure taken......that 100nH...no other measuremet was taken...so i guess i dont know.
You mean short one pri half and measure the inductance of the other?
 

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top