Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Coupling of pri and sec in 100:1 CST?

Status
Not open for further replies.

cupoftea

Advanced Member level 6
Advanced Member level 6
Joined
Jun 13, 2021
Messages
3,059
Helped
62
Reputation
124
Reaction score
139
Trophy points
63
Activity points
15,965
Hi,
We are doing a 100:1 CST using E20/10/6 former and core.
Attached A and B shows the 100 primary turns. C and D show two different ways of doing the secondary.
Please can you conform that C and D have the same coupling as each other, between pri and sec?

Also, the attached showing the two torroid pictures, please confirm they are both exactly one turn primary?
 

Attachments

  • 100 TO 1 CST on E20,10,6 Former.jpg
    100 TO 1 CST on E20,10,6 Former.jpg
    56.7 KB · Views: 180
  • Leakage inductance with twisted primary CST.jpg
    Leakage inductance with twisted primary CST.jpg
    70.5 KB · Views: 131
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top