D.A.(Tony)Stewart
Advanced Member level 7
- Joined
- Sep 26, 2007
- Messages
- 9,950
- Helped
- 1,856
- Reputation
- 3,713
- Reaction score
- 2,421
- Trophy points
- 1,413
- Location
- Richmond Hill, ON, Canada
- Activity points
- 63,530
After 1us delay a P Mosfet pulls motor high to short out motor in generator mode so it stops quickly. The dead time of 1us is minimum and ccan be more to revent shoot-thru or short across supply.
Thus a half bridge on low side, uses "pull (down)" to start and "push (up)" to stop. P type FET tend to have slightly higher RdsOn.
Thus a half bridge on low side, uses "pull (down)" to start and "push (up)" to stop. P type FET tend to have slightly higher RdsOn.