Vermes
Advanced Member level 4
This 3D scanner was inspired by a project that can be found at **broken link removed**.
The scanner was made to generate CNC paths based on the 3D model. All the cam-type programs have such a feature.
The scanner consists of:
Hardware:
- 2 stepper motor drivers (one to drive the laser, which rotates the worm gear for lifting windows in the car; the second is optional rotating table drive)
- Webcam, 500FX Powerc@m Flasch from Trust – Logitech 9000 pro recommended
- Arduino with Atmega328
- display
- some electronic elements
- laser level + tripod
- calibraiton screen
- PC
Software:
3D david laserscaner
Remember that the calibration process should take place with a well-lit calibration screen. Scanning on the contrary, the best in the dark.
The PCB:
Housing:
Rotating table:
Scanned item:
Scans:
Link to original thread (useful attachment) – Moje wykonanie Skanera 3D z forum "DAVID_Laserscaner"