High frequency oscillator circuit with IC TL494 as control circuit and IRFZ46N MOSFET

[mkanas]

Hello. Im a student.
i want to design a fixed frequency oscillator circuit using tl IC 494 for wireless power transmission. target of 60 khz or more. DC 12V battery input. the value of inductance tx coil is 848 nf. I've tried simulating it on proteus but it doesn't work.
Please help. thanks.

**broken link removed**

https://drive.google.com/file/d/16QfmvvEmiW_ZoDh53o3BeVFHzW67F63P/view?usp=drivesdk

 

[betwixt]

Please post images and files here mkanas, some, probably all of us can't open your google drive documents without your password.

Brian.

 

[mkanas]

sorry for late respon.

 

[FvM]

Should somehow work, but MOSFET switching is slow with us risetime due to weak gate drive. TL494 isn't suited to drive MOSFET directly, need push-pull gate driver.

I also doubt that the powerstage topology is optimal, I would rathe expect half- or full bridge with series LC circuit.

 

[mkanas]

Hi Pvm, thanks for respond
i think the circuit is not completed yet, how do i connect the push pull mofset to this circuit?
Yes, I plan to design a half bridge LC circuit on the Rx coil.
Thx

 

[FvM]

You need a half bridge gate driver, e.g. an IRF/Infineon boot strap driver like IR2110. For simple fixed frequency applications, you can also use a self-oscillating driver like IR2153 (half bridge) or IR2186 (full bridge) to safe the controller IC.

 

[mkanas]

thanks, for the advice.
Now, I have tried designing a new circuit, I don't know where the problem is.
maybe anyone can help me.

 

[KlausST]

Hi,

Weird wiring.
It's almost impossible to follow all the signals, especially GND.
Maybe you confused yourself this way. I wouldn't be surprised.

GND symbols are for free. You may use many of them without extra cost.

Klaus

 

[mkanas]

Hi KlausST, thanks already responded.
You are right, because I am just learning, so please guide me.
forget the first posted, I want to discuss the second posted, the circuit should be correct. I took it from a good source. but still an error.

and this my circuit