Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] stuck at faults implementation using FPGA

Status
Not open for further replies.

guru2kiot

Junior Member level 2
Junior Member level 2
Joined
Sep 2, 2016
Messages
22
Helped
8
Reputation
40
Reaction score
20
Trophy points
1,283
Activity points
1,445
Hello,
Can anyone suggest me how to implement stuck-at-faults (stuck-at-0 or stuck-at-1 faults) using FPGA. In my coding i have used stuck at faults using force the signals. Its able to done successfully in simulation level..but implementation its not able to synthesis using FPGA..so can anyone suggest me how to implement stuck-at-faults using FPGA??
 

Hello dpaul,
Thank you very much for your valuable response......above given link is surely very useful one for stuck at faults. In that discussion faults injections signals and its syntax followed by vhdl method. same like that is it possible to inject the faults in verilog ???
 
I have never implemented fault modeling, just know it in theory.
I have just glanced through the link and posted it here.
Replace the VHDL syntax by Verilog and play around with the suggested methods.

Search using phrase : stuck at fault + Verilog


https://groups.google.com/forum/#!topic/comp.lang.verilog/G83H0o7GW1Y

There should be more, just filter out as per your requirements.
 
Last edited:
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top